T3
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
Is it for you?
Best suited to
Commuters after an affordable trekking e-bike with hydraulic disc brakes and a proven rear-hub motor. At $1,999 it covers the spec sheet that most competitors charge $2,500 for.
Standout strength
Hydraulic disc brakes and 576Wh integrated battery at $1,999. Most competitors at this price use mechanical disc.
The main compromise
Rear-hub drive loses efficiency on steep grades. The throttle on the 2025 model creates compliance ambiguity under new state e-mobility laws.
Full specification
Drive and power
Frame and ride
Australian compliance
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
How you would ride it
NCM
Leon Cycle's value label, founded in Germany and sold direct in Australia through Leon Cycle Australia. The local range covers 250 W pedelec trekking, commuter and hardtail models built to undercut the bike shop brands on price.
Compare similar e-bikes
Common questions
How much does the NCM T3 cost in Australia?
The NCM T3 is listed at $1,999 (drive-away). eBikeFinder checks pricing against manufacturer and distributor information, and prices can change with sales and stock.
Is the NCM T3 road legal in Australia?
Yes. The NCM T3 is a 250W pedal-assist e-bike that stops assisting at 25 km/h, which meets the road-legal e-bike standard in every Australian state. It ships with a throttle; on a road-legal e-bike the throttle must not propel the bike above 6 km/h, so check how the throttle is set for your state. Compliance is asserted by the brand rather than independently verified, so confirm the current spec with the seller.
What is the range of the NCM T3?
The NCM T3 has a claimed range of 60 to 120 km from its 576Wh battery. Real-world range is usually lower than the claim, since it depends on assist level, rider weight, terrain and wind.
What motor does the NCM T3 have?
The NCM T3 uses a Das-Kit X15 motor, in a rear hub position.
How much does the NCM T3 weigh?
The NCM T3 weighs about 27 kg. That matters if you need to lift it onto a car rack, carry it up stairs, or store it, since e-bikes are heavier than regular bikes because of the motor and battery.
Who sells and backs the NCM T3 in Australia?
The NCM range is distributed in Australia by Leon Cycle Australia (direct to consumer). It comes with a Via Leon Cycle Australia warranty. Buying from a brand with real Australian support matters most when something needs a warranty claim or a service.