Scott Patron ST 10
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
Scott Patron ST 10 (2027) at a glance
The Scott Patron ST 10 is the long-travel Patron (170mm fork, 150mm rear) below the ST Tuned: carbon main frame with alloy rear, Bosch Performance Line CX with an 800Wh PowerTube and System Controller, RockShox ZEB and Super Deluxe, SRAM Eagle 70 Transmission and SRAM Maven Base four-piston brakes. It replaces the Patron ST 910.
The Scott Patron ST 10 is a enduro emtb e-bike sold in Australia. It pairs a Bosch Performance Line CX mid drive motor, a 800Wh battery, 29 inch wheels, and weighs 25.3kg. It is listed as a 250W pedal-assist e-bike limited to 25 km/h for Australian roads.
Also sold or searched as: Scott Patron ST eRIDE 10, Scott Patron ST 10 2027.
Is it for you?
Best suited to
Riders who want 170mm up front and enduro tyres on the Patron platform without flagship pricing.
Standout strength
RockShox ZEB fork, Super Deluxe shock and SRAM Maven brakes on a carbon main frame with the 800Wh Bosch CX system.
The main compromise
No screen (Bosch System Controller only) and no ABS despite some Scott copy mentioning it; no Australian price yet.
Full specification
Drive and power
Frame and ride
Australian compliance
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
Patron ST 10 vs Patron ST Tuned
| Scott Patron ST 10 | Scott Patron ST Tuned | |
|---|---|---|
| Price | POA | POA |
| Motor | Bosch Performance Line CX, mid drive | Bosch Performance Line CX-R, mid drive |
| Torque | TBC | TBC |
| Battery | 800 Wh | 800 Wh |
| Claimed range | TBC | TBC |
| Weight | 25.3 kg | 24.1 kg |
| Frame | Carbon main frame, alloy rear full suspension, 170mm front / 150mm rear | Full carbon full suspension, 170mm front / 150mm rear |
| Wheels | 29 inch | 29 inch |
| Category | Enduro eMTB | Enduro eMTB |
| Availability | Availability unconfirmed | Availability unconfirmed |
Choose the Patron ST 10 if
you want this spec at this price; on paper the two are very close, so ride both if you can.
Choose the Patron ST Tuned if
you prefer its frame, fit or finish; the core numbers are close, so fit and dealer support should decide it.
How you would ride it
Scott
Swiss brand with one of the widest e-bike ranges in Australia: the Bosch CX Patron and Strike full-suspension eMTBs, the lightweight TQ Voltage and Lumen, Axis trekking hardtails, Solace and Fastlane e-gravel and e-road bikes, and the Sub, Sweep and Passage city range.
Common questions
Is the Scott Patron ST 10 road legal in Australia?
Yes. The Scott Patron ST 10 is a 250W pedal-assist e-bike that stops assisting at 25 km/h, which meets the road-legal e-bike standard in every Australian state. Compliance is asserted by the brand rather than independently verified, so confirm the current spec with the seller.
What motor does the Scott Patron ST 10 have?
The Scott Patron ST 10 uses a Bosch Performance Line CX motor, in a mid-drive position. Mid-drive motors climb hills better because they work through the bike's gears.
How much does the Scott Patron ST 10 weigh?
The Scott Patron ST 10 weighs about 25.3 kg. That matters if you need to lift it onto a car rack, carry it up stairs, or store it, since e-bikes are heavier than regular bikes because of the motor and battery.
Who sells and backs the Scott Patron ST 10 in Australia?
The Scott range is distributed in Australia by Scott Sports Australia, sold through My Ride, Bicycle Superstore, Mackay Cycles and specialist Scott dealers. It comes with a Scott manufacturer's guarantee: 5 years on frames and rear ends (3 years if not serviced yearly by a Scott dealer; bike must be registered within one year). Bosch, TQ and component parts are covered by their makers. warranty. Buying from a brand with real Australian support matters most when something needs a warranty claim or a service.