Scott Patron 10
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
Scott Patron 10 (2027) at a glance
The Scott Patron 10 tops the new-generation 150mm Patron range: carbon main frame with an alloy rear, integrated shock, Bosch Performance Line CX with an 800Wh PowerTube, Kiox 300 display, Fox 36 Performance fork, SRAM GX Eagle AXS Transmission and Shimano XT brakes with Bosch ABS Pro. Scott quotes up to 120Nm from the CX drive unit.
The Scott Patron 10 is a trail emtb e-bike sold in Australia. It pairs a Bosch Performance Line CX mid drive motor with 120Nm of torque, a 800Wh battery, 29 inch wheels, and weighs 24.4kg. It is listed as a 250W pedal-assist e-bike limited to 25 km/h for Australian roads.
Also sold or searched as: Scott Patron eRIDE 10, Scott Patron 10 2027.
Is it for you?
Best suited to
Trail riders who want the best-equipped 150mm Patron, with ABS braking and wireless shifting.
Standout strength
Bosch ABS Pro on Shimano XT four-piston brakes, SRAM GX Eagle AXS Transmission and Fox Performance suspension around an 800Wh battery.
The main compromise
No Australian price yet, and at 24.4kg it is still a full-power, full-weight eMTB.
Full specification
Drive and power
Frame and ride
Australian compliance
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
Patron 10 vs Patron 20
| Scott Patron 10 | Scott Patron 20 | |
|---|---|---|
| Price | POA | POA |
| Motor | Bosch Performance Line CX, mid drive | Bosch Performance Line CX, mid drive |
| Torque | 120 Nm | 120 Nm |
| Battery | 800 Wh | 800 Wh |
| Claimed range | TBC | TBC |
| Weight | 24.4 kg | 24.3 kg |
| Frame | Carbon main frame, alloy rear full suspension, 150mm front / 150mm rear | Carbon main frame, alloy rear full suspension, 150mm front / 150mm rear |
| Wheels | 29 inch | 29 inch |
| Category | Trail eMTB | Trail eMTB |
| Availability | Availability unconfirmed | Availability unconfirmed |
Choose the Patron 10 if
you want this spec at this price; on paper the two are very close, so ride both if you can.
Choose the Patron 20 if
you prefer its frame, fit or finish; the core numbers are close, so fit and dealer support should decide it.
How you would ride it
Scott
Swiss brand with one of the widest e-bike ranges in Australia: the Bosch CX Patron and Strike full-suspension eMTBs, the lightweight TQ Voltage and Lumen, Axis trekking hardtails, Solace and Fastlane e-gravel and e-road bikes, and the Sub, Sweep and Passage city range.
Common questions
Is the Scott Patron 10 road legal in Australia?
Yes. The Scott Patron 10 is a 250W pedal-assist e-bike that stops assisting at 25 km/h, which meets the road-legal e-bike standard in every Australian state. Compliance is asserted by the brand rather than independently verified, so confirm the current spec with the seller.
What motor does the Scott Patron 10 have?
The Scott Patron 10 uses a Bosch Performance Line CX motor, in a mid-drive position, producing 120Nm of torque. Mid-drive motors climb hills better because they work through the bike's gears.
How much does the Scott Patron 10 weigh?
The Scott Patron 10 weighs about 24.4 kg. That matters if you need to lift it onto a car rack, carry it up stairs, or store it, since e-bikes are heavier than regular bikes because of the motor and battery.
Who sells and backs the Scott Patron 10 in Australia?
The Scott range is distributed in Australia by Scott Sports Australia, sold through My Ride, Bicycle Superstore, Mackay Cycles and specialist Scott dealers. It comes with a Scott manufacturer's guarantee: 5 years on frames and rear ends (3 years if not serviced yearly by a Scott dealer; bike must be registered within one year). Bosch, TQ and component parts are covered by their makers. warranty. Buying from a brand with real Australian support matters most when something needs a warranty claim or a service.