Scott Patron 30
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
Scott Patron 30 (2027) at a glance
The Scott Patron 30 is the entry to the new 150mm Patron range: carbon main frame with alloy rear, Bosch Performance Line CX with an 800Wh PowerTube, Intuvia 200 display, Fox AWL fork, Fox Float Rhythm shock, Shimano Deore 12-speed and Shimano MT620 four-piston brakes.
The Scott Patron 30 is a trail emtb e-bike sold in Australia. It pairs a Bosch Performance Line CX mid drive motor with 120Nm of torque, a 800Wh battery, 29 inch wheels, and weighs 24kg. It is listed as a 250W pedal-assist e-bike limited to 25 km/h for Australian roads.
Also sold or searched as: Scott Patron eRIDE 30, Scott Patron 30 2027.
Is it for you?
Best suited to
Riders who want the new Patron carbon frame and 800Wh battery at the entry point of the range.
Standout strength
The same carbon main frame, integrated shock and 800Wh Bosch CX system as the dearer Patrons.
The main compromise
Mechanical Shimano Deore shifting, Fox Sport level suspension and a basic Intuvia 200 display; no Australian price yet.
Full specification
Drive and power
Frame and ride
Australian compliance
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
Patron 30 vs Patron 10
| Scott Patron 30 | Scott Patron 10 | |
|---|---|---|
| Price | POA | POA |
| Motor | Bosch Performance Line CX, mid drive | Bosch Performance Line CX, mid drive |
| Torque | 120 Nm | 120 Nm |
| Battery | 800 Wh | 800 Wh |
| Claimed range | TBC | TBC |
| Weight | 24 kg | 24.4 kg |
| Frame | Carbon main frame, alloy rear full suspension, 150mm front / 150mm rear | Carbon main frame, alloy rear full suspension, 150mm front / 150mm rear |
| Wheels | 29 inch | 29 inch |
| Category | Trail eMTB | Trail eMTB |
| Availability | Availability unconfirmed | Availability unconfirmed |
Choose the Patron 30 if
you want this spec at this price; on paper the two are very close, so ride both if you can.
Choose the Patron 10 if
you prefer its frame, fit or finish; the core numbers are close, so fit and dealer support should decide it.
How you would ride it
Scott
Swiss brand with one of the widest e-bike ranges in Australia: the Bosch CX Patron and Strike full-suspension eMTBs, the lightweight TQ Voltage and Lumen, Axis trekking hardtails, Solace and Fastlane e-gravel and e-road bikes, and the Sub, Sweep and Passage city range.
Common questions
Is the Scott Patron 30 road legal in Australia?
Yes. The Scott Patron 30 is a 250W pedal-assist e-bike that stops assisting at 25 km/h, which meets the road-legal e-bike standard in every Australian state. Compliance is asserted by the brand rather than independently verified, so confirm the current spec with the seller.
What motor does the Scott Patron 30 have?
The Scott Patron 30 uses a Bosch Performance Line CX motor, in a mid-drive position, producing 120Nm of torque. Mid-drive motors climb hills better because they work through the bike's gears.
How much does the Scott Patron 30 weigh?
The Scott Patron 30 weighs about 24 kg. That matters if you need to lift it onto a car rack, carry it up stairs, or store it, since e-bikes are heavier than regular bikes because of the motor and battery.
Who sells and backs the Scott Patron 30 in Australia?
The Scott range is distributed in Australia by Scott Sports Australia, sold through My Ride, Bicycle Superstore, Mackay Cycles and specialist Scott dealers. It comes with a Scott manufacturer's guarantee: 5 years on frames and rear ends (3 years if not serviced yearly by a Scott dealer; bike must be registered within one year). Bosch, TQ and component parts are covered by their makers. warranty. Buying from a brand with real Australian support matters most when something needs a warranty claim or a service.