E-Bikes  /  Dyson Bikes  /  Mixte RTC 2026
Trail eMTBDISCOVER · COMPARE · RIDE · Dyson Bikes Mixte RTC 2026 step-through hardtail e-bike, side profile on white background
Current Australian model · checked 2026-09-22

Mixte RTC 2026

Dyson Bikes
$2,899ride-awaydysonbikes.com.au, 2026-09-22
100 kmRange
630 WhBattery
TBC NmTorque
25 km/hTop assist
Out of stock · hub drive · Currently sold out direct from Dyson; a local Dyson dealer may have stock.
The quick read

Is it for you?

Best suited to

Riders who want the Hard Tail Evo package with a lower step-over frame for easier mounting, on paths, gravel and light trails.

Standout strength

The same 630Wh battery, Tektro hydraulic brakes and Shimano 8-speed drivetrain as the Hard Tail Evo, in a lower step-through frame.

The main compromise

A front-hub drive without a published torque figure, better suited to paths and gravel than steep climbs, and currently sold out direct.

Consider something else if

You want the taller-standover Hard Tail Evo geometry, or a mid-drive eMTB for steep technical trails.

Check before you buy

Confirm the lower step-over seat-height range suits you, and check dealer stock while it is sold out direct.

Every number

Full specification

Drive and power
MotorDyson LPC front hub, hub drive
Battery630 Wh
Range50 to 100 km
Top assisted speed25 km/h
Frame and ride
FrameStep-through hardtail aluminium
Wheel size27.5-inch (CST 27.5 x 2.35)
DrivetrainShimano 8-speed
BrakesTektro hydraulic disc, 180mm rotors
Road-legal clarity

Australian compliance

claimed by brand

Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.

250 WRated motor
25 km/hAssist cutoff
NoThrottle

Dyson states AS 15194:2016 compliance: 250W nominal pedal-assist, assist cuts at 25 km/h, no throttle as standard. Per-model declaration not independently sighted.

Where it fits

How you would ride it

Trail eMTBCity & commutingWeekend adventureFitnesshardtailstep throughaustralian brandhub drive
D

Dyson Bikes

Dyson Bikes is a Melbourne e-bike brand (no relation to the appliance company), founded 2013 and based in Moorabbin. It builds affordable 250W pedal-assist commuters, folders and hardtails around an in-house front-hub drive, sold direct and through a national dealer network. Every model is built to the Australian AS 15194 pedelec standard.

OriginAustralia
AU supportDyson Bikes (Moorabbin, VIC)
Cross-shop

Compare similar e-bikes

Good to know

Common questions

How much does the Dyson Bikes Mixte RTC 2026 cost in Australia?

The Dyson Bikes Mixte RTC 2026 is listed at $2,899 (ride-away). eBikeFinder checks pricing against manufacturer and distributor information, and prices can change with sales and stock. This price was last checked on 2026-09-22.

Is the Dyson Bikes Mixte RTC 2026 road legal in Australia?

Yes. The Dyson Bikes Mixte RTC 2026 is a 250W pedal-assist e-bike that stops assisting at 25 km/h, which meets the road-legal e-bike standard in every Australian state. Compliance is asserted by the brand rather than independently verified, so confirm the current spec with the seller.

What is the range of the Dyson Bikes Mixte RTC 2026?

The Dyson Bikes Mixte RTC 2026 has a claimed range of 50 to 100 km from its 630Wh battery. Real-world range is usually lower than the claim, since it depends on assist level, rider weight, terrain and wind.

What motor does the Dyson Bikes Mixte RTC 2026 have?

The Dyson Bikes Mixte RTC 2026 uses a Dyson LPC front hub motor, in a front hub position.

Who sells and backs the Dyson Bikes Mixte RTC 2026 in Australia?

The Dyson Bikes range is distributed in Australia by Dyson Bikes (Moorabbin, VIC). Buying from a brand with real Australian support matters most when something needs a warranty claim or a service.