
$50 off with code NCM-CARTELL-50 at Leon Cycle.
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
Leon Cycle delivers NCM bikes pre-assembled and says a final adjustment and inspection by you or a bike shop is needed (it estimates 60 to 90 minutes) and that it cannot cover that cost. Delivery cost is not confirmed here: check it at checkout. Checked 27 October 2026.
This is an affiliate link. If you buy through it eBikeFinder may earn a commission, at no extra cost to you.
The NCM Prague is an entry hardtail e-MTB: a Das-Kit X15 250W rear hub (500W peak), a 36V 13Ah (468Wh) battery with a claimed 70km range, Shimano Altus 3 x 7 gearing, Tektro mechanical discs and a 100mm Suntour XCT fork, in 26, 27.5 or 29 inch sizes.
The NCM Prague is a trail emtb e-bike sold in Australia at $1,499 (price checked 8 Nov 2026). It pairs a Das-Kit X15 hub drive motor, a 468Wh battery rated for up to 70km, 26, 27.5 or 29-inch wheels, and weighs 25kg. It is listed as a 250W pedal-assist e-bike limited to 25 km/h for Australian roads.
This is an affiliate link. If you buy through it eBikeFinder may earn a commission, at no extra cost to you.
We have not ridden this bike. This read is based on the spec sheet and Australian seller information, not a test ride.
Budget buyers who want a hardtail e-MTB for paths and gravel in a choice of three wheel sizes.
Three wheel and frame sizes covering riders from 155 to 205cm, at NCM's lowest e-MTB price.
Mechanical disc brakes and a small 468Wh battery.
You want hydraulic brakes and a bigger battery, where the M3 steps up.
Use Leon Cycle's sizing chart to pick 26, 27.5 or 29 inch for your height.
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
| NCM Prague | NCM M3 | |
|---|---|---|
| Model year | 2026 | 2025 |
| Price | $1,499 | $1,799 |
| Motor | Das-Kit X15, hub drive | Das-Kit X15, hub drive |
| Torque | TBC | TBC |
| Battery | 468 Wh | 576 Wh |
| Claimed range | 70 km | 110 km |
| Weight | 25 kg | 25 kg |
| Frame | Hardtail aluminium 6061, 440, 480 or 520mm | Hardtail aluminium 6061 |
| Wheels | 26, 27.5 or 29-inch | 27.5-inch (26, 27.5 and 29 inch sizes) |
| Category | Trail eMTB | Trail eMTB |
| Availability | In stock | In stock |
it costs $300 less.
its battery is 108 Wh bigger, so you charge less often on long rides.
Leon Cycle's value label, founded in Germany and sold direct in Australia through Leon Cycle Australia. The local range covers 250 W pedelec trekking, commuter and hardtail models built to undercut the bike shop brands on price.
The NCM Prague is listed at $1,499 (listed bike price). Leon Cycle delivers NCM bikes pre-assembled and says a final adjustment and inspection by you or a bike shop is needed (it estimates 60 to 90 minutes) and that it cannot cover that cost. Delivery cost is not confirmed here: check it at checkout. Checked 27 October 2026. eBikeFinder checks pricing against manufacturer and distributor information, and prices can change with sales and stock. This price was last checked on 8 Nov 2026.
The motor assists up to 25 km/h, the limit for road-legal e-bikes in Australia. You can pedal faster than that, but the motor stops helping above 25 km/h.
Yes. The NCM Prague is a 250W pedal-assist e-bike that stops assisting at 25 km/h, which meets the road-legal e-bike standard in every Australian state. Compliance is asserted by the brand rather than independently verified, so confirm the current spec with the seller.
The NCM Prague has a claimed range of about 70 km from its 468Wh battery. Real-world range is usually lower than the claim, since it depends on assist level, rider weight, terrain and wind.
The NCM Prague uses a Das-Kit X15 motor, in a rear hub position.
The NCM Prague weighs about 25 kg. That matters if you need to lift it onto a car rack, carry it up stairs, or store it, since e-bikes are heavier than regular bikes because of the motor and battery.
The NCM range is distributed in Australia by Leon Cycle Australia (direct to consumer). Warranty terms: Via Leon Cycle Australia: 2 years on the frame and 1 year on electrical parts, including battery, motor, controller, display and lights. Checked 25 October 2026 on the T3s page. Buying from a brand with real Australian support matters most when something needs a warranty claim or a service.