Amflow PX Carbon
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
Amflow PX Carbon (2026) at a glance
The Amflow PX Carbon pairs DJI's Avinox M2S motor (130Nm nominal, 150Nm peak, 250W rated) with a 700Wh battery in a carbon frame with 40 geometry settings, a FOX 36, SRAM S1000 Eagle Transmission and Magura Gustav Pro brakes on mixed wheels. Amflow quotes 21.2kg for a size L. $9,999, pre-order only in Australia when checked.
The Amflow PX Carbon is a trail emtb e-bike sold in Australia at $9,999 (price checked 25 Oct 2026). It pairs a DJI Avinox M2S mid drive motor with 130Nm of torque, a 700Wh battery claimed at up to 144km (Amflow's claim, measured on a PX Carbon Pro (700Wh) with an 80kg rider on flat paved road in Eco mode.), 29 x 2.5 front, 27.5 x 2.5 rear (Schwalbe Magic Mary and Albert, mixed wheels) wheels, and is listed at 21.2kg (Amflow's factory-configuration weight for size L without mudguards, lights, pedals or protection film, tubeless. M 21.0kg.). It is listed as a 250W pedal-assist e-bike limited to 25 km/h for Australian roads.
Is it for you?
We have not ridden this bike. This read is based on the spec sheet and Australian seller information, not a test ride.
Best suited to
Technical trail riders who want Avinox's stronger M2S motor and lots of geometry adjustment.
Standout strength
The Avinox M2S motor (130Nm nominal, 150Nm in Boost) with 40 geometry settings.
The main compromise
Pre-order only when checked, and Amflow does not state the rear travel on its Australian spec page.
Consider something else if
You want a bigger battery. The PL Carbon carries 800Wh for $600 less.
Check before you buy
Confirm the delivery date, and ask the dealer for the rear travel figure for your size.
Full specification
Drive and power
Frame and ride
Australian compliance
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
PX Carbon vs PX Carbon Pro
| Amflow PX Carbon | Amflow PX Carbon Pro | |
|---|---|---|
| Model year | 2026 | 2026 |
| Price | $9,999 | $13,999 |
| Motor | DJI Avinox M2S, mid drive | DJI Avinox M2S, mid drive |
| Torque | 130 Nm | 130 Nm |
| Battery | 700 Wh | 700 Wh |
| Claimed range | 144 km (Amflow's claim, measured on a PX Carbon Pro (700Wh) with an 80kg rider on flat paved road in Eco mode.) | 144 km (Amflow's claim, measured on this bike (700Wh) with an 80kg rider on flat paved road in Eco mode.) |
| Weight | 21.2 kg (Amflow's factory-configuration weight for size L without mudguards, lights, pedals or protection film, tubeless. M 21.0kg.) | 20.8 kg (Amflow's factory-configuration weight for size L without mudguards, lights, pedals or protection film, tubeless. M 20.6kg, XL 20.9kg, XXL 21.1kg.) |
| Frame | Carbon full suspension, 40 geometry settings via headset cups and chainstay flip chip, 27.5in or 29in rear wheel | Carbon full suspension, 40 geometry settings via headset cups and chainstay flip chip, 27.5in or 29in rear wheel |
| Wheels | 29 x 2.5 front, 27.5 x 2.5 rear (Schwalbe Magic Mary and Albert, mixed wheels) | 29 x 2.5 front, 27.5 x 2.5 rear (Schwalbe Magic Mary and Albert), Amflow XMC-30 carbon wheels |
| Category | Trail eMTB | Trail eMTB |
| Availability | Pre-order | Pre-order |
Choose the PX Carbon if
it costs $4,000 less.
Choose the PX Carbon Pro if
you prefer its frame, fit or finish; the core numbers are close, so fit and dealer support should decide it.
How you would ride it
Amflow
Amflow builds carbon full-power e-MTBs around DJI's Avinox drive system. In Australia it sells the PL (Avinox M1, up to 800Wh) and PX (Avinox M2S, 700Wh) families direct and through dealers; every build was a pre-order when checked in October 2026.
Compare similar e-bikes
Common questions
How much does the Amflow PX Carbon cost in Australia?
The Amflow PX Carbon is listed at $9,999 (Amflow AU store and Spoke N Trail). eBikeFinder checks pricing against manufacturer and distributor information, and prices can change with sales and stock. This price was last checked on 25 Oct 2026.
Is the Amflow PX Carbon road legal in Australia?
Yes. The Amflow PX Carbon is a 250W pedal-assist e-bike that stops assisting at 25 km/h, which meets the road-legal e-bike standard in every Australian state. Compliance is asserted by the brand rather than independently verified, so confirm the current spec with the seller.
What is the range of the Amflow PX Carbon?
The Amflow PX Carbon has a claimed range of about 144 km from its 700Wh battery. Real-world range is usually lower than the claim, since it depends on assist level, rider weight, terrain and wind. Amflow's claim, measured on a PX Carbon Pro (700Wh) with an 80kg rider on flat paved road in Eco mode..
What motor does the Amflow PX Carbon have?
The Amflow PX Carbon uses a DJI Avinox M2S motor, in a mid-drive position, producing 130Nm of torque. Mid-drive motors climb hills better because they work through the bike's gears.
How much does the Amflow PX Carbon weigh?
The Amflow PX Carbon is listed at 21.2 kg. Amflow's factory-configuration weight for size L without mudguards, lights, pedals or protection film, tubeless. M 21.0kg.. Ask the dealer to weigh your size and build before choosing a rack or planning to lift it.
Who sells and backs the Amflow PX Carbon in Australia?
The Amflow range is distributed in Australia by Amflow Australia official store (amflowbikes.com/au) and dealers including Spoke N Trail. Warranty terms: Per Amflow's Australian FAQ: carbon frame 5 years for the original owner (2 years if transferred); stem, handlebar, wheels, paint and graphics 2 years; accessories 1 year; Avinox drive system 2 years; battery 2 years or up to 500 charge cycles. Parts Amflow does not make are covered by their own makers. Checked 25 October 2026. Buying from a brand with real Australian support matters most when something needs a warranty claim or a service.