Amflow PR Carbon Pro
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
Amflow PR Carbon Pro (2027) at a glance
The Amflow PR Carbon Pro is the upgraded PR build: DJI Avinox M2S (130Nm nominal, 150Nm peak, 250W rated) with a removable 800Wh battery, a 160mm FOX 36 Performance, FOX Float X Performance, SRAM S1000 Eagle Transmission and Magura Gustav Pro brakes. $8,699 at Spoke N Trail, pre-order when checked.
The Amflow PR Carbon Pro is an enduro emtb e-bike sold in Australia at $8,699 (price checked 2 Nov 2026). It pairs a DJI Avinox M2S mid drive motor with 150Nm of torque, a 800Wh battery, 29in front, Schwalbe Albert 27.5 x 2.5 rear wheels. It is listed as a 250W pedal-assist e-bike limited to 25 km/h for Australian roads.
Is it for you?
We have not ridden this bike. This read is based on the spec sheet and Australian seller information, not a test ride.
Best suited to
Riders who want the PR's removable battery with the stronger M2S motor, FOX 36 suspension and Magura brakes.
Standout strength
Avinox M2S with up to 150Nm, a removable 800Wh battery and FOX 36 and Float X suspension for $8,699.
The main compromise
Pre-order only, with no published weight for this build.
Consider something else if
You do not need the extra power; the PR Carbon saves $1,700 with the M2 motor.
Check before you buy
Confirm the delivery date for your size with Spoke N Trail before paying the balance, and ask which dealer services the Avinox system near you.
Full specification
Drive and power
Frame and ride
Australian compliance
Pedal-assist, rated to 250W, assist cuts at 25 km/h. Declared by the brand; declaration not independently sighted.
PR Carbon Pro vs PR Carbon
| Amflow PR Carbon Pro | Amflow PR Carbon | |
|---|---|---|
| Model year | 2027 | 2027 |
| Price | $8,699 | $6,999 |
| Motor | DJI Avinox M2S, mid drive | DJI Avinox M2, mid drive |
| Torque | 150 Nm | 125 Nm |
| Battery | 800 Wh | 800 Wh |
| Claimed range | TBC | TBC |
| Weight | TBC | TBC |
| Frame | Carbon full suspension, 40 adjustable geometry settings, 27.5in or 29in rear wheel | Carbon full suspension, 40 adjustable geometry settings, 27.5in or 29in rear wheel |
| Wheels | 29in front, Schwalbe Albert 27.5 x 2.5 rear | 29 x 2.5 front (Maxxis Assegai), Maxxis Minion DHR II rear |
| Category | Enduro eMTB | Enduro eMTB |
| Availability | Pre-order | Pre-order |
Choose the PR Carbon Pro if
it has 25 Nm more torque for steep hills and heavy loads.
Choose the PR Carbon if
it costs $1,700 less.
How you would ride it
Amflow
Amflow builds carbon full-power e-bikes around DJI's Avinox drive system. In Australia it sells the PL (Avinox M1, up to 800Wh) and PX (Avinox M2S, 700Wh) e-MTBs, the PR with a removable 800Wh battery and the TL full-suspension touring bike, direct and through dealers such as Spoke N Trail; every build was a pre-order when checked in late 2026.
Compare similar e-bikes
Common questions
How much does the Amflow PR Carbon Pro cost in Australia?
The Amflow PR Carbon Pro is listed at $8,699 (Spoke N Trail, 800Wh removable battery). eBikeFinder checks pricing against manufacturer and distributor information, and prices can change with sales and stock. This price was last checked on 2 Nov 2026.
Is the Amflow PR Carbon Pro road legal in Australia?
Yes. The Amflow PR Carbon Pro is a 250W pedal-assist e-bike that stops assisting at 25 km/h, which meets the road-legal e-bike standard in every Australian state. Compliance is asserted by the brand rather than independently verified, so confirm the current spec with the seller.
What motor does the Amflow PR Carbon Pro have?
The Amflow PR Carbon Pro uses a DJI Avinox M2S motor, in a mid-drive position, producing 150Nm of torque. Mid-drive motors climb hills better because they work through the bike's gears.
Who sells and backs the Amflow PR Carbon Pro in Australia?
The Amflow range is distributed in Australia by Amflow Australia official store (amflowbikes.com/au) and dealers including Spoke N Trail. Warranty terms: Per Amflow's Australian FAQ: carbon frame 5 years for the original owner (2 years if transferred); stem, handlebar, wheels, paint and graphics 2 years; accessories 1 year; Avinox drive system 2 years; battery 2 years or up to 500 charge cycles. Parts Amflow does not make are covered by their own makers. Checked 25 October 2026. Buying from a brand with real Australian support matters most when something needs a warranty claim or a service.